1/4" Vinyl Micro Tubing


1/4" Vinyl Micro Tubing

Sometimes referred to as “spaghetti tubing.” Significantly softer and more flexible than 1/2" Mainline Tubing. Easy to cut with any sharp blade or scissors. Use with 30 psi pressure regulator and ¼" Vinyl Micro Tubing. Use a barb to connect a length of ¼" Vinyl Micro Tubing to a length of 1/2" Mainline Tubing and plug a Spot Emitter into the other end of the line.

For watering anything with an irregular spacing: potted plants, trees, shrubs, landscape plants, etc. We sell sets of these preassembled, but if you need large quantities or different lengths it will make more sense to build your own.

9189 1/4" Vinyl Micro Tubing
Item Discounted
A: 100 ft roll of line only; no barbs (5#) $15.00
B: 1000 ft roll of line only; no barbs (11#) $100.00 ($95.00)
Log in
to start or resume an order

Additional Information

Drip Irrigation

Drip irrigation applies moisture where it is needed, at the plants’ roots, so it conserves water and does not cause mold problems. The drip method helps crops get over transplant shock and get established, and ensures adequate water supply until the rain comes. Also useful in greenhouses.

We recommend sketching your garden and proposed irrigation system before you order to ensure that you receive all the pieces you need.

Click here for help in designing your own system.